The ScaleBlaster SB-350 is a powerful electronic water descaler which comes in an heavy duty enclosure and features a digital readout display.
- Powerful 2 amp output
- Digital electronics and full readout display
- Works on 115 or 230 VAC.
- Maximum pipe size: 3"
- Pipe type - Copper, PVC, PEX, non magnetic steel pipe
- Water hardness range 1-100 gpg
- Pipe Size Capacity: up to 3" pipe size diameter. Designed for commercial use only. UL, CUL Listed. CE approved
- Pipe Type: PVC, copper or any non-ferrous based pipe.
- Input Voltage: 90-264 VAC at 47-63 Hz
- Input Power: less then 7 watts
- Output Voltage: no more than 5 Volts DC (open circuit).
- Output Current: 2A double blast
- Input Fuse: 1A, 250VAC, 5x20mm, fast acting, Radio Shack # 270-1049
- Output Fuse: 3.15A, 250VAC, 5x20mm, fast acting, Radio Shack # 270-1054
- Descaling Method: The control box supplies a square wave signal to a coil of wire that is wrapped around the pipe. The signal is swept anywhere from 1,000 to 20,000 times a second, producing a modulating frequency waveform that hits the resonant frequency of the calcium molecules causing them to lose it's adhesiveness.
- Enclosure Dimensions: 12" x 10" x 5"
- Enclosure Material: 16 gauge steel, powder coated ANSI 61 gray. NEMA 12, 13, 4. UL 508 type 3R, 4, 12, & 13. CSA Type 3R, 4, 12, & 13. IEC 60529, IP66. Weatherproof enclosure.
- Signal Cable: 18 gauge, single stranded wire, 55 feet long (red) if used on pipe sizes 2" or less, or 18 gauge, 3 conductor wire (black). 42 feet long on pipe sizes 2.5" and up. Unit includes roll of black wire.
- Warranty: 10 years parts and labor.
- Shipping Weight: 16 lb.
- Carton Dimensions: 18.5" x 14.5" x 10.5"
